105975 Swift-Latch - Standard - Round Tubes

Glacier Adapter - Standard - Round Tubes (105635)
This KFI Glacier Adapter is designed to be permanently attached to the Discontinued Round Style UTV Push Tubes (105635) and keeps the plow mount off of your machine during spring, summer and fall. Designed for the following “stock” Full-Size Polaris Rangers with the Glacier Bumper installed. Mid-Size Polaris Machines (unless modified) are too low to use the current Glacier Adapters properly. Ensure the correct Glacier Adapter is ordered for your push tubes. The 105975 is ONLY compatible with the Discontinued Round Style Push Tubes (105635). If you have the Pro 2.0 Square Style Push Tubes, you would need to look at our other glacier adapter options Here.

The glacier bar height is critical. If your machine is listed below, but you have (or are going to install) tracks, larger tires, or a lift kit, an alternate mount may be available for your machine that will be compatible with our push tube leveling kits.

Improper geometry can lead to a bad blade angle and/or force being applied incorrectly. The optimal height of the 105975 Std. Glacier Adapter mounting location should be 14” from the ground. See image above for reference.

If your machine isn’t listed in the table, but you have the Discontinued Round Style Push Tubes and a glacier bumper that matches the measurements shown in the photo above, you can use the corresponding Glacier Adapter based on your height.

This product is not sold direct. Locate a dealer near you to purchase your plow system! Dealer Locator